Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 224 / 1598

224 ExtremeWare Software 7.0.0 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
unconfig ports redundant
unconfig ports [<portlist> | <port id> | mgmt] redundant
Description
Clears a previously configured software-controlled redundant port.
Syntax Description
Default
N/A.
Usage Guidelines
On a modular switch,
<portlist>
can be a list of slots and ports. On a stand-alone switch,
<portlist>
can be one or more port numbers. For a detailed explanation of port specification, see “Modular Switch
Numerical Ranges” or “Stand-alone Switch Numerical Ranges” in Chapter 1.
The
<port id>
is the display string configured for the port. Use the
config ports <portnumber>
display-string <string>
command to configure a display string for the port.
The list of port numbers or the port display string specifies the redundant port(s).
Example
The following command unconfigures a software-controlled redundant port on a stand-alone switch:
unconfig ports 4 redundant
The following command unconfigures a software-controlled redundant port on a modular switch:
unconfig ports 2:3 redundant
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the “i” series platforms.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
portid Specifies a port using the display string configured for the port. Only one port
can be specified using this method.
mgmt Specifies the management port. Supported only for switches that provide a
management port.