Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 603 / 1598

config tacacs server
ExtremeWare Software 7.0.0 Command Reference Guide 603
config tacacs server
config tacacs [primary | secondary] server [<ipaddress> | <hostname>]
{<tcp_port>} client-ip <ipaddress>
Description
Configures the server information for a authentication server.
Syntax Description
Default
uses TCP port 49.
Usage Guidelines
Configure the server information for a server.
To remove a server, use the address 0.0.0.0 as the IP address of the server to be configured.
Use of the <hostname> parameter requires that DNS be enabled.
Example
The following command configures server tacacs1 as the primary server for client switch
10.10.20.35:
config tacacs primary server tacacs1 client-ip 10.10.20.35
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on the “i” series platforms.
primary Configures the primary server.
secondary Configures the secondary server.
ipaddress The IP address of the server being configured.
hostname The host name of the server being configured.
tcp_port The TCP port to use to contact the server.
ipaddress The IP address used by the switch to identify itself when communicating with
the server.