Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 606 / 1598

606 ExtremeWare Software 7.0.0 Command Reference Guide
Security Commands
config tacacs-accounting server
config tacacs-accounting [primary | secondary] server [<ipaddress> |
<hostname>] {<udp_port>} client-ip <ipaddress>
Description
Configures the accounting server.
Syntax Description
Default
Unconfigured.
Usage Guidelines
You can use the same server for accounting and authentication.
To remove a server, use the address 0.0.0.0 as the IP address of the server to be configured.
Example
The following command configures server tacacs1 as the primary accounting server for client
switch 10.10.20.35:
config tacacs-accounting primary server tacacs1 client-ip 10.10.20.35
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on the “i” series platforms.
primary Configures the primary accounting server.
secondary Configures the secondary accounting server.
ipaddress The IP address of the accounting server being configured.
hostname The host name of the accounting server being configured.
tcp_port The TCP port to use to contact the server.
ipaddress The IP address used by the switch to identify itself when communicating with
the accounting server.