manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 1222 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 1222

 

1222

ExtremeWare Software 7.0.0 Command Reference Guide

IPX Commands

unconfig ipxrip

unconfig ipxrip {vlan <vlan name>}

Description

Resets the IPX/RIP settings on one or all VLANs to the default. 

Syntax Description

Default

N/A.

Usage Guidelines

Removes import and export filters, and resets the MTU size, update interval, and inter-packet delay.

Example

The following command

unconfig ipxrip vlan backbone

History

This command was introduced in ExtremeWare 4.0.

Platform Availability

This command is available on the all “i” series systems.

vlan name

Specifies a VLAN name. 

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments