Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 218 / 1598

218 ExtremeWare Software 7.0.0 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
show sharing address-based
show sharing address-based
Description
Displays the address-based load sharing configuration.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
This feature is available using the address-based load-sharing algorithm only. The address-based
load-sharing algorithm uses addressing information to determine which physical port in the
load-sharing group to use for forwarding traffic out of the switch. Addressing information is based on
the packet protocol, as follows:
• IP packets—Uses the source and destination MAC and IP address, and the TCP port number.
• IPX packets—Uses the source and destination MAC address and IPX identifiers.
•
All other packets—Uses the source and destination MAC address.
To verify your configuration, use the
show sharing address-based
command. The show sharing
address-based output displays the addressed-based configurations on the switch.
Example
The following example displays the address-based load sharing configuration on the switch:
show sharing address-based
Following is the output from this command:
Sharing address-based = L2_L3_L4
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the “i” series platform and the Alpine 3800 series switch modules.