manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 834 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 834

 

834

ExtremeWare Software 7.0.0 Command Reference Guide

IP Unicast Commands

disable icmp unreachables

disable icmp unreachables {vlan <vlan name>}

Description

Disables the generation of ICMP unreachable messages on one or all VLANs.

Syntax Description

Default

Enabled.

Usage Guidelines

None.

Example

The following command disables the generation of ICMP unreachable messages on all VLANs:

disable icmp unreachables

History

This command was available in ExtremeWare 2.0. 

This command was modified in an ExtremeWare IP Technology Services Release based on 
ExtremeWare v6.1.8b12 to support MPLS modules.

Platform Availability

This command is available on “i” series platforms.

vlan name

Specifies a VLAN name.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments