Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 638

Page: 638 / 1598

638

ExtremeWare Software 7.0.0 Command Reference Guide

Security Commands

disable tacacs

Description

Disables for authentication and authorization.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

None.

Example

The following command disables authentication and authorization for the switch:

disable tacacs

History

This command was first available in ExtremeWare 6.1.

Platform Availability

This command is available on the “i” series platforms.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.0.0

Reviews:

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 638 / 1598

Search results

Summary of Contents for ExtremeWare 7.0.0

Reviews: