Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 1467

Page: 1467 / 1598

config debug-trace bootprelay

ExtremeWare Software 7.0.0 Command Reference Guide

1467

config debug-trace bootprelay

config debug-trace bootprelay <debug level> vlan <vlan name>

Description

This command records debug information to the syslog.

Syntax Description

Default

The default level is 0.

Usage Guidelines

The

debug level

range is 0 to 5. Higher levels record more verbose messages. Higher levels also record

the messages recorded at lower levels.

Example

The following command sets the reporting level for BOOTP relay errors to 3:

config debug-trace bootprelay 3

History

This command was first available in ExtremeWare 6.1.

Platform Availability

This command is available on all “i” series platforms.

debug level

Specifies a debug level:

0 —

None.

1 —

Records error messages and tracks BOOTP messages relayed.

2 —

No additional information recorded.

3 —

No additional information recorded.

4 —

Displays a dump of each packet.

5 —

No additional information recorded.

vlan name

Specifies a VLAN name.

«
...
1465
1466
1467
1468
1469
...
»

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.0.0

Reviews:

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 1467 / 1598

Search results

Summary of Contents for ExtremeWare 7.0.0

Reviews: