manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 535 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 535

 

enable cli-config-logging

ExtremeWare Software 7.0.0 Command Reference Guide

535

enable cli-config-logging

enable cli-config-logging

Description

Enables the logging of CLI configuration commands to the Syslog for auditing purposes. 

Syntax Description

This command has no arguments or variables.

Default

Enabled.

Usage Guidelines

ExtremeWare allows you to record all configuration changes and their sources that are made using the 
CLI by way of Telnet or the local console. The changes are logged to the system log. Each log entry 
includes the user account name that performed the changes and the source IP address of the client (if 
Telnet was used). Configuration logging applies only to commands that result in a configuration 
change.

Every command is displayed in the log window. This allows you to view every command executed on 
the switch.

To view the status of configuration logging on the switch, use the 

show management

 command. The 

show management

 command displays information about the switch including the enable/disable state 

for configuration logging.

Example

The following command enables the logging of CLI configuration commands to the Syslog:

enable cli-config-logging

History

This command was first available in ExtremeWare 6.0.

Platform Availability

This command is available on all platforms.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments