manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 1191 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 1191

 

config ipxrip vlan trusted-gateway

ExtremeWare Software 7.0.0 Command Reference Guide

1191

config ipxrip vlan trusted-gateway

config ipxrip vlan [<vlan name> | all] trusted-gateway [none | 

<access_profile>]

Description

Assigns an export route filter to the egress VLAN.

Syntax Description

Default

N/A.

Usage Guidelines

Only services matching the trusted gateway are advertised on the egress VLAN.

Example

The following command assigns export route filter 

smith

 to VLAN 

accounting

:

config ipxrip vlan accounting trusted-gateway access_profile

History

This command was introduced in ExtremeWare 4.0; 

access-profile

s modified in version 6.1.5b20.

Platform Availability

This command is available on all platforms.

vlan name

Specifies a VLAN name. 

all

Specifies all VLANs.

none

Specifies no export filters.

access_profile

Specifies an access profile name.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments