Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 186 / 1598

186 ExtremeWare Software 7.0.0 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
disable smartredundancy
disable smartredundancy [<portlist>]
Description
Disables the smart redundancy feature.
Syntax Description
Default
Disabled.
Usage Guidelines
On a modular switch,
<portlist>
can be a list of slots and ports. On a stand-alone switch,
<portlist>
can be one or more port numbers. For a detailed explanation of port specification, see “Modular Switch
Numerical Ranges” or “Stand-alone Switch Numerical Ranges” in Chapter 1.
Use with Extreme Networks switches that support privacy and backup uplinks.
When smartredundancy is disabled, the switch changes the active link only when the current active link
becomes inoperable.
Example
The following command disables the smart redundancy feature on ports 1-4:
disable smartredundancy 1-4
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms switches.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.