Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 991

Page: 991 / 1598

enable ospf

ExtremeWare Software 7.0.0 Command Reference Guide

991

enable ospf

Description

Enables the OSPF process for the router.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

None.

Example

The following command enables the OSPF process for the router:

enable ospf

History

This command was available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.0.0

Reviews:

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 991 / 1598

Search results

Summary of Contents for ExtremeWare 7.0.0

Reviews: