manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 1234 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 1234

 

1234

ExtremeWare Software 7.0.0 Command Reference Guide

ARM Commands

disable accounting

disable accounting

Description

Disables the destination-sensitive accounting function.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

Destination-sensitive accounting collects statistics that are maintained for forwarded IP traffic to support 
billing on a destination basis. To configure destination-sensitive accounting, a bin number can be 
assigned to one or more IP route entries using the ExtremeWare 

route-map

 command.

Example

The following command disables the destination-sensitive accounting function:

disable accounting

History

This command was first available in an ExtremeWare IP Technology Services Release based on 
v6.1.8b12.

This command was subsequently incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on the BlackDiamond switch only.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments