manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 1109 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 1109

 

enable bgp always-compare-med

ExtremeWare Software 7.0.0 Command Reference Guide

1109

enable bgp always-compare-med

enable bgp always-compare-med

Description

Enables BGP to use the Multi Exit Discriminator (MED) from neighbors in different autonomous 
systems (ASs) in the route selection algorithm. 

Syntax Description

This command has no arguments or variables.

Default

Enabled.

Usage Guidelines

MED is only used when comparing paths from the same AS. A MED value of zero is treated as the 
lowest MED and therefore the most preferred route.

Example

The following command enables BGP to use the Multi Exit Discriminator (MED) from neighbors in 
different autonomous systems in the route selection algorithm:

enable bgp always-compare-med

History

This command was first available in ExtremeWare 6.1.

Platform Availability

This command is available on all “i” series platforms.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments