manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 794 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 794

 

794

ExtremeWare Software 7.0.0 Command Reference Guide

IP Unicast Commands

config iparp add

config iparp add <ip address> <mac_address>

Description

Adds a permanent entry to the ARP table. Specify the IP address and MAC address of the entry.

Syntax Description

Default

N/A.

Usage Guidelines

Add a permanent IP ARP entry to the system. The 

ip address

 is used to match the IP interface 

address to locate a suitable interface.

Example

The following command adds a permanent IP ARP entry to the switch for IP address 10.1.2.5:

config iparp add 10.1.2.5 00:11:22:33:44:55

History

This command was available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

ip address

Specifies an IP address.

mac_address

Specifies a MAC address.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments