manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 1188 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 1188

 

1188

ExtremeWare Software 7.0.0 Command Reference Guide

IPX Commands

config ipxrip vlan export-filter

config ipxrip vlan [<vlan name> | all] export-filter [none | 

<access_profile>]

Description

Assigns an export route filter to an ingress VLAN. 

Syntax Description

Default

N/A.

Usage Guidelines

Only the network ID matching the export filter will be added to the IPX route table.

Example

The following command assigns an export route filter to ingress VLAN 

accounting

:

config ipxrip vlan accounting export-filter my-profile

History

This command was introduced in ExtremeWare 4.0; 

access-profile

s modified in version 6.1.5b20.

Platform Availability

This command is available on the all “i” series systems.

vlan name

Specifies a VLAN name. 

all

Specifies all VLANs.

none

Specifies no export filters.

access_profile

Specifies an access profile name.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments