manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 60 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 60

 

60

ExtremeWare Software 7.0.0 Command Reference Guide

Commands for Accessing the Switch

config dns-client delete domain-suffix

config dns-client delete domain-suffix <domain_name>

Description

Deletes a domain name from the domain suffix list.

Syntax Description

Default

N/A.

Usage Guidelines

This command randomly removes an entry from the domain suffix list. If the deleted item was not the 
last entry in the list, all items that had been added later are moved up in the list. If no entries in the list 
match the domain name specified, an error message will be displayed. 

Example

The following command deletes a domain name from the domain suffix list:

config dns-client delete domain-suffix xyz_inc.com

History

This command was first available in ExtremeWare 6.2.2.

Platform Availability

This command is available on all platforms.

domain_name

Specifies a domain name.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments