manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 965 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 965

 

delete isis area

ExtremeWare Software 7.0.0 Command Reference Guide

965

delete isis area

delete isis area [<isis area identifier> | all]

Description

Deletes an IS-IS level 1 area.

Syntax Description

Default

N/A.

Usage Guidelines

Currently, only one level 1 area can be created.

The maximum length for an area identifier is 32 characters. The identifier must begin with one 
alphabetic character followed by up to 31 alphabetic or numeric characters.

The 

all

 option deletes all of the level 1 areas simultaneously.

The level 1 area can only be deleted when no interface attaches to it.

Example

The following command deletes an IS-IS level 1 area:

delete isis area a1000

History

This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently 
incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on the “i” series platforms.

isis area identifier

Specifies the area identifier.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments