manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 1085 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 1085

 

config bgp peer-group source-interface

ExtremeWare Software 7.0.0 Command Reference Guide

1085

config bgp peer-group source-interface

config bgp peer-group <peer group> source-interface [any | vlan <vlan 

name>]

Description

Configures the source interface for a peer group and all the neighbors of the peer group. 

Syntax Description

Default

N/A.

Usage Guidelines

Changes made to the parameters of a peer group are applied to all neighbors in the peer group.

Modifying the following parameters automatically disables and enables the neighbors before changes 
take effect:

•

remote-as

•

timer

•

source-interface

•

soft-in-reset

•

password

Example

The following command configures the source interface for the peer group external and its neighbors on 
the VLAN accounting:

config bgp peer-group external source-interface accounting

History

This command was available in ExtremeWare 6.1.5.

Platform Availability

This command is available on all “i” series platforms.

peer group

Specifies a peer group.

any

Specifies any source interface.

name

Specifies a VLAN name.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments