Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 547 / 1598

show flowstats
ExtremeWare Software 7.0.0 Command Reference Guide 547
show flowstats
show flowstats {<portlist> | export {<group#>}}
Description
Displays status information for the flow statistics function.
Syntax Description
Default
Displays summary statistics information for all ports.
Usage Guidelines
The command with no arguments displays flowstats configuration information for all ports. The
information is displayed in a format similar to the flowstats command syntax. For the statistics that
apply to individual ports, the port number is presented without a “port” keyword. For example, in the
NetFlow Enable/Disable per port
and
NetFlow TimeOut Config
sections of the example below,
the port number immediately follows the
flowstats
keyword. The following information is displayed:
• Whether the flowstats feature is enabled or disabled
• Whether flowstats is enabled or disabled for individual ports
• The configuration of flow-collector devices (
NetFlow Server Config
)
• NetFlow Timeout configurations
• Whether NetFlow Filters are enable or disabled
• NetFlow filter specifications
• NetFlow ping-check configuration
When the
detail
keyword is included, the NetFlow Servers Config section is replaced by detailed
configuration information that includes counts of the number of times each flow-collector device has
been removed from the distribution list due to ping-check failures.
For each export group, the following information is displayed:
• Whether ping-check is enabled
• The source IP address
• An entry for each flow-collector device in the export group, displaying the following:
— The IP address of the device
— The UPD port number for the device
— Whether the device is up or down (based on the ping-check response)
— The number of times the device has been unreachable based on the ping-check response
portlist Use this optional parameter to specify one or more ports or slots and ports for which status
information is to be displayed.
group# Use this optional parameter with the
group
keyword to display status information for a
specific export group.