manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 179 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 179

 

disable jumbo-frame ports

ExtremeWare Software 7.0.0 Command Reference Guide

179

disable jumbo-frame ports

disable jumbo-frame ports [<portlist> | all]

Description

Disables jumbo frame support on a port.

For PoS modules, this command applies to PoS ports when disabling jumbo-frame support changes the 
negotiated maximum receive unit (MRU) size.

Syntax Description

Default

Disabled.

Usage Guidelines

On a modular switch, 

<portlist>

 can be a list of slots and ports. On a stand-alone switch, 

<portlist>

 

can be one or more port numbers. For a detailed explanation of port specification, see “Modular Switch 
Numerical Ranges” or “Stand-alone Switch Numerical Ranges” in Chapter 1. 

Use the 

disable jumbo-frame

 

ports

 command when you no longer need jumbo frame support.

Example

The following command disables jumbo frame support on port 4 on a stand-alone switch:

disable jumbo-frame ports 4

The following command disables jumbo frame support on slot 1, port 2 on a BlackDiamond switch:

disable jumbo-frame 1:2

History

This command was first available in ExtremeWare 6.0.

This command was modified in ExtremeWare 6.1 to support PoS modules.

Platform Availability

This command is available on the “i” series platforms.

portlist

Specifies one or more ports or slots and ports. On a modular switch, can be a 
list of slots and ports. On a stand-alone switch, can be one or more port 
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8. 

all

Specifies all ports on the switch.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments