manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 971 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 971

 

disable isis originate-default

ExtremeWare Software 7.0.0 Command Reference Guide

971

disable isis originate-default

disable isis [level-2 | area <isis area identifier>] originate-default

Description

Disables the origination of an IS-IS default route from a system into the level 1 area or level 2 
subdomain.

Syntax Description

Default

The default setting is disabled.

Usage Guidelines

None.

Example

The following command disables the origination of an IS-IS default route for the level 2 subdomain:

disable isis level-2 originate-default

History

This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently 
incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on the “i” series platforms.

level-2

Specifies the level 2 subdomain.

area identifier

Specifies a level 1 area identifier.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments