manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 820 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 820

 

820

ExtremeWare Software 7.0.0 Command Reference Guide

IP Unicast Commands

config vlan upd-profile 

config vlan <vlan name> udp-profile <profile_name>

Description

Assigns a UDP-forwarding profile to the source VLAN.

Syntax Description

Default

N/A.

Usage Guidelines

After the UDP profile has been associated with the VLAN, the switch picks up any broadcast UDP 
packets that match the user-configured UDP port number, and forwards those packets to the 
user-defined destination. If the UDP port is the DHCP/BOOTP port number, appropriate 
BOOTP/DHCP proxy functions are invoked.

Example

The following command assigns a UDP profile to VLAN accounting:

config vlan accounting udp-profile port_34_to_server

History

This command was first available in ExtremeWare 4.0.

Platform Availability

This command is available on “i” series platforms.

vlan name

Specifies a VLAN name. 

profile_name

Specifies a UDP profile name.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments