manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 1351 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 1351

 

enable ports loopback remote

ExtremeWare Software 7.0.0 Command Reference Guide

1351

enable ports loopback remote

enable ports <portlist> [t1 | t3] loopback remote [line | payload | 

loopdown]

Description

Enables and disables remote loopback modes for T1 and T3 ports.

Syntax Description

Default

Loopback is disabled by default.

Usage Guidelines

This command enables and disables remote loopback for T1 and T3 links. There is no equivalent 
command for E1 links.

The “loopdown” keyword is used to disable loopback at the remote end.

Example

The following command causes the remote end of a T3 link to enter payload loopback mode:

enable ports 3:1 t3 loopback remote payload

History

This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.

T3 support was added in ExtremeWare v6.1.8w3.0.1b61 WAN technology release.

This command was subsequently incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on the Alpine 3800 series platform, when a WAN module is installed.

portlist

A list of ports.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments