manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 1345 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 1345

 

delete account pppuser

ExtremeWare Software 7.0.0 Command Reference Guide

1345

delete account pppuser

delete account pppuser <username>

Description

Deletes an entry in the local PPP authentication database. 

Syntax Description

Default

N/A.

Usage Guidelines

Deletes a user from the PPP authentication database. Existing links already authenticated are not 
affected by this command.

Example

The following command example removes the entry for 

stretch

 from the authentication database:

delete account pppuser stretch

History

This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.

This command was subsequently incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on the Alpine 3800 series platform, when a WAN module is installed. A 
similar command is available on the BlackDiamond switch.

username

Specifies the user name used for authentication.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments