Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 636

Page: 636 / 1598

636

ExtremeWare Software 7.0.0 Command Reference Guide

Security Commands

disable radius-accounting

Description

Disables RADIUS accounting.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

None.

Example

The following command disables RADIUS accounting for the switch:

disable radius-accounting

History

This command was first available in ExtremeWare 4.1.

Platform Availability

This command is available on all platforms.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.0.0

Reviews:

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 636 / 1598

Search results

Summary of Contents for ExtremeWare 7.0.0

Reviews: