Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 203 / 1598

show edp
ExtremeWare Software 7.0.0 Command Reference Guide 203
show edp
show edp {<portlist>}
Description
Displays connectivity and configuration information for neighboring Extreme Networks switches.
Syntax Description
Default
N/A.
Usage Guidelines
On a modular switch,
<portlist>
can be a list of slots and ports. On a stand-alone switch,
<portlist>
can be one or more port numbers. For a detailed explanation of port specification, see “Modular Switch
Numerical Ranges” or “Stand-alone Switch Numerical Ranges” in Chapter 1.
Use the
show edp
command to display neighboring switches and configurations. This is most effective
with Extreme Networks switches.
Example
The following command displays the connectivity and configuration of neighboring Extreme Networks
switches:
show edp
Following is the output from this command:
Port 1: EDP is enabled
Remote-system: Summit5i (Version 6.2.2)
Remote-ID=00:00:00:01:30:e9:ef:00
Remote-Port=1:1 Age=37
Remote-Vlans:
Mgmt(4094, 10.45.208.223) test1(0) Default(1)
MacVlanDiscover(0)
Port 3: EDP is enabled
Remote-system: Summit7i (Version 6.2.2)
Remote-ID=00:00:00:e0:2b:99:fe:00
Remote-Port=1:3 Age=35
Remote-Vlans:
Mgmt(4094) Default(1) MacVlanDiscover(0)
Port 5: EDP is enabled
Remote-system: Alpine3808 (Version 6.2.2)
Remote-ID=00:00:00:01:30:31:55:00
Remote-Port=1:1 Age=47
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.