Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 78 / 1598

78 ExtremeWare Software 7.0.0 Command Reference Guide
Commands for Accessing the Switch
reboot
reboot {time <date> <time> | cancel} {slot <slot>}
Description
Reboots the switch or the module in the specified slot at a specified date and time.
Syntax Description
Default
N/A.
Usage Guidelines
If you do not specify a reboot time, the switch will reboot immediately following the command, and
any previously scheduled reboots are cancelled. To cancel a previously scheduled reboot, use the
cancel
option.
The slot <slot> option is added to the command to make it possible to reboot a module in a specific
slot. When you specify this option, the command applies to the module in the specified slot, rather than
to the switch. In general, the modules that can be rebooted have separate images from the ExtremeWare
image for the switch.
The modules that can be rebooted are: E1, T1, T3, ARM, ATM, MPLS, and PoS.
The E1, T1, and T3
reboot slot
command does not support the
time
or
cancel
keywords, so this
command can only be executed immediately.
Example
The following command reboots the switch at 8:00 AM on April 15, 2002:
reboot 04/15/2002 08:00:00
The following command reboots the MPLS module in slot number 5:
reboot time 10/04/2001 10,46,00 slot 5
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 7.0.0 to include the
slot
option.
date Specifies a reboot date in
mm/dd/yyyy
format.
time Specifies a reboot time in
hh:mm:ss
format.
cancel Cancels a previously scheduled reboot.
slot Specifies the slot where the module is installed.