Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 285 / 1598

config ipqos add
ExtremeWare Software 7.0.0 Command Reference Guide 285
config ipqos add
config ipqos add {tcp | udp | other | all} <dest_ipaddress>/<mask_length>
{l4-dstport <tcp/udp_port_number>} {<ip_src_address>/<mask_length>}
{l4-srcport <tcp/udp_port_number>} [qosprofile <qosname> | blackhole]
Description
Applies a set of destination IP addresses to an IPQoS traffic grouping by specifying a network address
and subnet mask.
Syntax Description
Default
N/A.
Usage Guidelines
The longer form (also known as a flow) is used for specifying additional components of IP packets, such
as IP source address, and destination or source TCP/UDP port information.
tcp Specifies that the TCP protocol is to be used for this traffic grouping.
udp Specifies that the UDP protocol is used for this traffic grouping.
other Specifies that an IP protocol other than TCP or UDP is to be used for this
traffic grouping.
all Specifies that any IP protocol may be used for this traffic grouping.
dest_ipaddress/mask_length The destination IP address (or group of IP addresses) to which the QoS
profile is applied.
Mask length is a value that indicates the length of the subnet mask to be
applied.
ltcp/upd_port_number The layer 4 destination port number. This is the IP port number associated
with the protocol specified in the command string.
• If TCP is used as the protocol, the layer 4 port number is a TCP port
number.
• If UDP is used, the layer 4 port number is a UDP port number.
• If not specified, all port numbers used by the IP protocol (TCP or UDP) are
implied.
ip_src_address/mask_length The source IP address (or group of IP addresses) to which the QoS profile is
applied.
Mask length is a value that indicates the length of the subnet mask to be
applied.
ltcp/udp_port_number The layer 4 source port number. This is the IP port number associated with
the protocol specified in the command string.
• If TCP is used as the protocol, the layer 4 port number is a TCP port.
• If UDP is used, the layer 4 port number is a UDP port.
qosname Specifies the name of the QoS profile to be used by this traffic grouping.
blackhole Specifies the blackhole profile.