manualshive.com logo in svg

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 249 / 1598

Share
Download
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 249

 

delete vlan

ExtremeWare Software 7.0.0 Command Reference Guide

249

delete vlan

delete vlan <vlan name> 

Description

Deletes a VLAN.

Syntax Description

Default

N/A.

Usage Guidelines

If you delete a VLAN that has untagged port members, and you want those ports to be returned to the 
default VLAN, you must add them back explicitly using the 

config vlan add port

 command. 

NOTE

The default VLAN cannot be deleted.

Example

The following command deletes the VLAN accounting:

delete accounting

History

This command was first available in ExtremeWare 1.0.

Platform Availability

This command is available on all platforms.

vlan name

Specifies a VLAN name. 

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments