Extreme Networks ExtremeWare 7.0.0 Command Reference Manual Download Page 878

Page: 878 / 1598

878

ExtremeWare Software 7.0.0 Command Reference Guide

IP Unicast Commands

show iparp

show iparp {<ip address> | <mac_address> | vlan <vlan name> | permanent}

Description

Displays the IP Address Resolution Protocol (ARP) table. You can filter the display by IP address, MAC
address, VLAN, or permanent entries.

Syntax Description

Default

Show all entries.

Usage Guidelines

Displays the IP ARP table, including:

•

IP address

•

MAC address

•

Aging timer value

•

VLAN name, VLAN ID and port number

•

Flags

Example

The following command displays the IP ARP table:

show iparp 10.1.1.5/24

History

This command was available in ExtremeWare 2.0.

This command was modified in ExtremeWare 6.2.1 to provide the MAC address option.

Platform Availability

This command is available on all platforms.

ip address

Specifies an IP address.

mac_address

Specifies a MAC address.

vlan name

Specifies a VLAN name.

permanent

Specifies permanent entries.

Summary of Contents for ExtremeWare 7.0.0































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.0.0

Reviews:

Extreme Networks ExtremeWare 7.0.0, Command Reference Manual, Page: 878 / 1598

Search results

Summary of Contents for ExtremeWare 7.0.0

Reviews: