194
WT.050.580.000.DE.IM.0714
Installation
MFC
6.
6.3.5
Fitting the fine filter
Please note
A fine filter must only be installed when membrane sensors are
employed.
The fine filter (C) is contained in the enclosed accessory set.
A Knurled nut
B O-ring
C Fine filter
D Filter unit
1
Release both knurled nuts (A).
2
Remove complete filter unit (D).
3
Place the fine filter (C) into the filter unit. Ensure that the O-
ring (B) is fitted correctly (insert as far as possible).
4
Fit the filter unit (D). Ensure that it is fitted in the correct
position.
5
Retighten both knurled nuts (A).
A
B
C
A
D
Summary of Contents for WALLACE & TIERNAN MFC
