18
WT.050.580.000.DE.IM.0714
Description
MFC
3.
Chemical analysis
Photometric measuring process
Zero point calibration
By stopping flow rate or dechlorinated sample water
typ. zero current approx. 1 µA
Response time T
90
:
< 20 sec.
Influence of the pH value
HOCI curve
Temperature compensation
0–50 °C
Storage temperature
-10 °C to +50 °C (without electrolyte)
Volumetric flow control
Flow rate:
approx. 33 l/h (controlled)
Control range:
0.2 to 4.0 bar
Back-pressure:
- non-pressurised version
(open drain)
- pressurised version 1.5 bar
Water quality
swimming pool, potable, industrial and process water
Sample water
Sample water temperature:
max +50 °C
Conductivity
min. 200 µS/cm
Service life
Life of the electrolytes in operation approx. 6 months
Electrode service life in operation approx. 5 years
(reduced by poor water quality, e.g. sand, filth)
Connections
Sample water:
PVC hose 6 x 3 mm or
PE-hose 6 x 1 mm
Thread connection:
G1/2" or NPT-1/4“
Summary of Contents for WALLACE & TIERNAN MFC
