MFC
Functions
4.
41
4. Functions
4.1
General Information
The MFC is a special measuring and control device for use in
potable water and industrial process water treatment.
Typical applications:
•
Measurement and registration of water parameters
•
Flow-controlled potable water chlorination (compound-loop-
control)
•
Flow-controlled fluroide dosing (compound-loop-control)
•
pH single feed back control
•
Chlorine single feed back control
•
Quantity-proportional dosing of disinfectants (single feed
forward control)
•
etc.
The device processes up to four process parameters
simultaneously, which are recorded with special sensor measuring
modules and sensors.
Possible process measurements:
Free chlorine, combined chlorine, total chlorine, chlorine dioxide,
potassium permanganate, ozone, pH, Redox, fluoride,
conductivity
As an option, two additional control signal inputs can be installed
to log flow rate and external setpoint using a combicontrol.
The integrated graphic display displays the following:
•
Measured value
•
Mode
•
Bar graph with limit values
•
Setpoint and measuring range
•
Description of customised measuring points
•
etc.
The menus are easy to use, displayed in plain text and are
selected using softkeys.
Summary of Contents for WALLACE & TIERNAN MFC
