Evoqua WALLACE & TIERNAN MFC, Instruction Manual

Page: 10 / 268

10
WT.050.580.000.DE.IM.0714
General Safety Instructions
MFC
2.
Notes for operating personnel Always read the operating manual, in particular the safety
instructions, before you operate the device for the first time!
Never employ any working methods which could endanger safety!
Always comply with the prescribed values for sample water
admission pressure, connection voltage and ambient and
operating conditions!
Never deactivate any safety features!
During operation of the device there is the risk of unexpected
incorrect functions resulting from failure or errors of the control
system.
In the event of such safety-relevant changes in the operating
performance of the device, switch it off immediately and remedy
the fault or have it remedied immediately!
When the device is switched off, external voltage may still be
applied.
Always eliminate or have eliminated any leakage on the flow block
assembly immediately!
In the event of a fire always switch the device off with the external
main switch or the external main circuit breaker or fuse!
2.5 Guarantee Conditions
The following must be observed for compliance with guarantee
conditions:
• Installation, commissioning by Evoqua technicians or trained
and authorised specialised personnel, e.g. of contracted
companies
• Intended Use
• The operation parameters and settings must be met.
• The system may only be operated by trained personnel.
• A works journal must be kept.
• Use of approved calibration solutions
• The system should always be protected against frost.
• Execution of maintenance work by operating personnel
• Use of original spare parts
If any of the above conditions are not met, the guarantee is
revoked.