Evoqua WALLACE & TIERNAN MFC, Instruction Manual

Page: 105 / 268

MFC
Functions
4.
105
Starting Adaption 1 Starting from the basic display, select "Adaption" from the
"Cl
2
free ( )" menu.
The Tu and Ts loop parameters are displayed.
2 In the "Cl
2
Adaption" menu, select the "ADAPT softkey.
This displays the diagram of the previous adaption.
3 Press "START" to start the adaption.
Adaption starts.
Displays The diagram shows the chlorine value curve during the adaption
phases.
The current phase of adaption (total of 13) is shown in the bottom
line.
Successful adaption is confirmed by the "ADAPTION OK"
message.
Press the "BACK" softkey to return to the basic display.
If adaption is not successful, the error message "ADAPTION?" is
displayed.
0
2 2 h
C o n t r o l 1 A D A P T I O N m g / l
1 , 0 0
1 8 . 0 5 . 0 2
0 , 2 8
m g / l
y m = 0 %
X = 2 7 %
M E N U
1 8 h
1 4 h
0
2 2 h
A D A P T I O N m g / l
1 , 0 0
1 8 . 0 5 . 0 2
B R E A K
0 , 2 8
m g / l
y m = 0 %
X = 2 7 %
M E N U
2 : X = 2 0 %
1 8 h
1 4 h
S T A R T
S T A R T