Evoqua WALLACE & TIERNAN MFC, Instruction Manual

Page: 121 / 268

MFC
Operation
5.
121
Operation You have the following options starting from the basic display:
Switch between the
basic displays and trend
graphs • Press the up or down key
Select menu • Press the "MENU" softkey to
select the menu
• Press the "CAL" softkey to
calibrate
• Press the "MODE" softkey to set
the operating mode
Select a menu item in
the menu display • Select the menu item with the
arrow keys (arrow in front of
menu item)
• Confirm the selection with
"ENTER"
Change/enter displayed
parameters • Select the parameter with the
arrow keys (arrow in front of
parameter)
• Confirm the selection with
"ENTER"
• Change/enter the display with
the up or down key
• Confirm the entry with "ENTER"
Cancel entry • Press the "ESC" key to exit the
menu item. Entries which have
not been confirmed are reset to
their original settings.
Reactivate password
protection This function is only active when a
password has been programmed.
• Change/enter displayed
parameters
• Block the system entry with the
"LOCK" softkey in the menu
display
Exit the menu item • Press the "ESC" key
or
• Press the "BACK" softkey