Evoqua WALLACE & TIERNAN MFC, Instruction Manual

Page: 118 / 268

118
WT.050.580.000.DE.IM.0714
Operation
MFC
5.
MFC provides the option to assign a customer-specific name or
designation to each measurement. In the menu "Module designat"
of the "System" menu, you can name each measurement as
desired up to six characters, such as "Inlet", "Main", "Tank", etc.
This name is displayed in the main display under the associated
measurement. If blanks (default setting) are entered as a module
name, it is deactivated and does not appear in the main displays.
Dosing and alarm indications
LED The nine LEDs are another indicating element. The significance of
the eight red LEDs depends on the selected application. This
determines whether control output or alarm is selected. The
significance is marked on the labelling strip to the right of the LED.
The green LED lights up when the device is switched on
(POWER).
General messages Adaption is running!
This message appears if an attempt is made during adaption to
automatically calibrate the positioner.
This function is possible in the MANUAL mode only!
This message appears, for example, if an attempt is made to
calibrate the positioner during automatic operation. Acknowledge
by pressing ENTER or the ESC key.
A module was removed!
Do you wish to accept this configuration?
This message appears when the device is switched on after
removal of a module. Confirm with the yes/no key.
New hardware component found!
This message appears when the device is switched on after
addition of a module.
Please note
Information on the plug-in cards which are contained in the device
are displayed in "Analog scan" when it is switched on or can be
viewed statically in the "Diagnosis" menu under "Software
Versions"
(Display 1.8.5 “Diagnosis - Menu 1.8" on page 144 ).
INLET