Docomo FOMA D901i, Manual

Page: 86 / 596

84
Making
/Receivin
g
Vid
e
o-pho
ne C
a
lls
Operations during video-phone calls
･
The following operations can be performed from the submenu during video-phone calls:
･
You can record the other party’s voice with In-call Voice Memo while making a call by holding down
C
for over a second.
☛
P448
Submenu item Description Page
a
Switch cameras Switches between the in-camera /out-camera. P94
b
Compact light ON/OFF Switches between the Compact light ON or OFF. P96
c
Camera settings Applying effects on images which is displayed, setting brightness
and color density for the camera images to be sent during video-
phone calls and switching to Macro Mode.
P90, P95
d
Receive quality Set the quality of received images. This setting may not be
enabled depending on the function of the other party’s terminal.
P97
e
V-phone settings Changing settings for the screen to be displayed during
video-phone calls.
P97
f
Chara-den settings Changing the Chara-den character, switching between full and
semi motion and selecting actions. In addition, a still image set in
Substitute Image of Image Setting: V-Phone can be displayed.
P376
g
Play file Change frame and still image to send to the other party. P90, P91
h
Send DTMF Transmits tone signals (DTMF) during video-phone calls. P95
i
Volume Adjusts Earpiece Volume. P67
INFORMATION
● You can make a video-phone call by performing Steps 2 and Step 1 in the reverse order. When
t
is
pressed and the phone number is pressed, the video-phone call can be made automatically after 5
seconds.
● You may not be able to make a call while executing another function.
☛
P547
● Please note that the communication charges are based on the rate for digital communication rather than
the voice calls even if the substitute image or Chara-den is used.
● While using video-phone, dialing operation to a voice call can not be performed. Also, “Unable to call.” is
displayed.
● If a video-phone call attempt fails, the following message (text information) will be displayed on the
screen. The display returns to the stand-by display automatically. Note that displayed messages may not
reflect the status on the other party correctly, depending on the type of the terminal and/or conditions of
the network service contract of the other party.
Message Description
Check the number and retry You dialed the phone number not used.
Busy The other party is busy or during packet communication.
Disconnected due to outside of
service/power off
The other party is outside the service area or the other
party’s phone terminal is turned OFF.
Driving mode The phone of the other party is in Driving Mode.
Select on for Call ID Notification This message is displayed in case connecting without
notifying the caller ID (when accessing to the V live or visual
site).
Failed to connect Set Caller ID Notification “Notify” and dial again.
･
The message may be also displayed for cases other than
the above.