Docomo FOMA D901i, Manual, Page: 169 / 596

167
Safe
ty set
ting
s
5
Press
1
to
2
.
Enable Reject/Accept Call
･
This setting applies to all phone numbers with Reject/Accept Call set.
･
Reject Call and Accept Call are not enabled simultaneously.
1
Press
m865
on the stand-by display.
2
Enter the terminal security code.
3
Press
2
or
3
.
If “Reject call” is set, any incoming call from phone numbers set to be rejected is disconnected without
activating the ring alert and the caller hears a busy tone.
If “Accept call” is set, any incoming call from phone numbers set not to be accepted is disconnected
without activating the ring alert and the caller hears a busy tone.
･
Rejected calls are recorded in Received Calls.
･ If Ringing Time setting is set to 0 for Voice Mail Service or Call Forwarding Service, Voice Mail
Service or Call Forwarding Service is activated and the call is not recorded as a received call.
INFORMATION
●
When operating from the FOMA terminal phonebook details screen, press
m
and select “Set/Check”
→
“Setting”
→
“Accept/Reject Call”.
●
Since the setting of Reject/Accept Call is canceled for the phone number changed or deleted, set Reject/
Accept Call for the phone number changed or registered again.
Default Cancel settings
When Reject/Accept Call is set
INFORMATION
●
If a call without caller ID is received from a party you set Reject Call, FOMA terminal’s response depends
on the setting in Anonymous Caller regardless of this function setting.
●
Short Message (SMS) and i-mode Mail messages are received regardless of this function.
●
A call can be made to the phone numbers with Reject/Accept Call set regardless of this function setting.
In addition, the phonebook data can be edited.
･
is indicated to the right side of the phonebook No. in the phonebook
details screen that Reject/Accept Call is set.
■ When canceling Reject /Accept Call
a
Press
3
.
■
When canceling Reject/Accept Call
a
Press
1
.