Docomo FOMA D901i, Manual

Page: 566 / 596

564
App
e
nd
ix
Software Update
Update Software
This function checks for the necessity of updating FOMA terminal software and downloads part
of the software as required through packet transmission* to update the software.
When software update is required, the information will be posted in “
お知らせ＆ヘルプ
(Notice &
Help)” on the DoCoMo website or iMenu.
* Packet transmission for software update is free of charge.
･
Software may be updated in the following two methods:
･
Software cannot be updated in the following cases:
･
At the time of updating software, the unique information of your mobile phone terminal (model or
serial number, etc.) will be automatically sent to the server (or the server for updating software
operated by the company). DoCoMo will not use the sent information for any other purpose than
software update.
･
Immediate update : update on the spot as desired.
☛
P566
･
Advanced update : specify the day and time-slot for automatic update of the software in the specified day and
time-slot.
☛
P567
･
During All lock
･
During PIM lock
･
When PIN1 code is being entered
･
When date and time are not set
･
In Self mode ON
･
When is indicated
･
When the battery is not fully charged
･
While using other functions
･
The power is OFF
･
During PINI code lock
･
When UIM is not inserted
･
While talking
INFORMATION
●
If software has already been updated, the message of “No update is needed. Please continue to use as
before.” appears when checking software updating.
● Software update is available even if the Host selection setting is other than i-mode.
●
Software update (downloading or rewriting) may take time.
●
If software update is executed when “ON” is set for PIN1 code ON/OFF, the PIN code entry screen will
be displayed at the time of automatic reload after completion of software updating. You cannot make/
receive calls and operate communication functions if the incorrect PIN1 code is entered.
●
Other functions are not available while software is being updated. Only incoming voice calls can be
answered while downloading.
●
If “Movie ringtone” has been set for phone as a ring tone, a melody sounds for an incoming call in
downloading software. If you set video/i-motion as an calling/incoming image, the first image is
displayed.
●
Any incoming video-phone call cannot be answered during download. Unanswered calls are recorded as
missed ones in Received calls.
● Even if any alarm is set while software is being updated, the updating continues without activating the
alarm.
●
For software update, SSL session is established to the server (our site). Enable SSL certificate for
“Certificate Setting”. Configured as valid by default.
☛
P237
●
Software update should be done with battery fully charged and enough battery power ( ).
●
It is recommended that software update be executed when good signal quality is obtained, three bars of
the antenna icon ( ) are displayed and the terminal is not being moved.
* If radio wave signals become weaker during software downloading or downloading has stopped, retry
software update in a place with strong radio wave signals.
● A displayed icon of the message stored at i-mode Center disappears after software update.
If Receive option is set to “ON” and e-mail arrives during software updating, the screen that notifies an
arrival of e-mail in the i-mode Center may not appear after the software update being completed.
☛
P297
● Never remove the battery pack while updating software. Update may fail.