Docomo FOMA D901i, Manual, Page: 3 / 596

1
How to use this manual
[ Quick Reference Manual
☛
P588 ]
The structure of this manual and the manner of description are explained here.
･ The operation procedure is mainly explained in shortcut operations.
☛
P29
For shortcut operations for the each menu item, see the menu list.
☛
P524
･
In this manual, to select an item by placing the cursor with
O
(Easy Selector Plus) and pressing
o
(enter key) is referred to as “select”. Also, the step of pressing
o
which requires after entering
characters in the entry field is omitted in description.
･
When there are two or more possible operation procedures, the simplest one is mentioned.
･
The procedure for entering characters is mainly explained by in-line entry (direct insertion of text into
the entry field).
☛
P512
･
The images or illustration provided in this manual are for information purposes only and may differ
from the actual displays or products.
INFORMATION
●
Some screens do not support bilingual function and are displayed in Japanese. The Japanese terms
which are used in this manual are described both in Japanese and English only for the first time in a
chapter or a section.
72
Makin
g/R
eceivin
g Calls
Status Message
Setting Status Message
You can record a response hold guidance in your own voice.
･
One guidance up to 10 seconds long can be recorded.
･
While a voice or a video-phone call is on Response and Hold, the status message set by this function
is played.
Setting a recorded data for guidance
1
Press
m867
on the stand-by display.
2
Select On-hold tone field and press
2
.
･
Press
1
and go to Step 4 to reset to the default message.
3
Select “Record” in Edit message field and speak the response hold guidance
after the beep.
Recording will start after the message is displayed.
･ An end tone (beep) sounds approximately 10 seconds after the start of recording.
･ Press
o
to stop in the middle of the guidance recording.
･ “Record” cannot be selected when a recorded data has already been registered. Select
“Delete”, select “Yes” and record after deleting the recorded data.
･
Select “Play” to check the recorded status message.
4
Press
p
.
Default On-hold tone: Standard
INFORMATION
● If “Standard” is set for On-hold tone, the guidance “I cannot answer to the phone right now. Please wait
or call back later (in Japanese)” is played for the other party while on Response and Hold.
● When a recorded status message is deleted, the default status guidance is reset.
Example
An approximate guide
of the remaining time
for recording is
displayed.
Important
screens
displayed while
in operation or
performing
steps
Supplement to
operation
Notes for
operation
Indicates the
following screen
exists
INFORMATION
Useful information
or reference pages
Default setting
Functional
overview
Basic operating
procedure
INDEX
Chapter title
Title