Docomo FOMA D901i, Manual, Page: 253 / 596

251
Mail
Adding receivers [ Add Address ]
You can send i-mode Mail to up to 5 addresses at the same time (multi-address transmission).
･
The receiver can be one of the three types: (TO), (CC) and (BCC). Enter the
address of the direct receiver in field.
・ In field, add an address to which you wish to send the contents of the mail in addition to the
direct receiver.
・ In field, add an address you do not wish to be known to other receivers. The mail address
entered in field is not shown to other receivers.
･
Mail with no address specified in field cannot be sent.
1
Place the cursor at the address field on the mail composition screen and press
a
.
☛
P249
■ Adding CC or BCC
a
Press
m6
.
b
Select input method.
･
Select “View phonebook” to enter a mail address by searching from the phonebook.
･ Select “Mail group” to select and enter addresses in a mail group.
･
Select “Direct input” to enter a mail address directly.
c
Select “CC” or “BCC” and enter a mail address.
･
Also “TO” can be selected.
･ When “Mail group” is selected, the already specified mail address is displayed for TO, CC
and BCC.
●
Except for exchanges between i-mode terminals (including mova), do not use one-byte katakana
characters or pictograms. They may not be displayed correctly at the receiver side.
●
Depending on the model of the receiver’s i-mode terminal, some pictograms may not be displayed
correctly.
●
When transmission fails, an error message is displayed and the i-mode Mail is saved in Unsent
messages. You can edit and send i-mode Mail from Unsent messages.
☛
P265
●
When transmission is completed correctly, the i-mode Mail is saved in Outbox. When there is not enough
available storage space in Outbox, or the maximum allowable number of sent mail is exceeded, the
oldest sent mail is overwritten. However, protected mail is not overwritten. Be sure to protect sent mail
you want to keep.
☛
P287
●
An error message for address unknown, etc. may not be received when mail is sent to addresses other
than DoCoMo.
●
To use the phonebook when Privacy Mode is active (“Authorized access” set for Phonebook & Logs),
entry of the terminal security code is required.
●
When there is not enough available storage space in Unsent messages, or the maximum number of
unsent mail is exceeded, i-mode Mail cannot be composed. Delete unnecessary i-mode Mail and/or
Short Message (SMS) from Unsent messages (
☛
P288).
●
Mail can be composed quickly using templates.
☛
P262
●
You can compose and send i-mode Mail easily to the parties saved to the phonebook No. 0 to 99 (Quick
Mail).
☛
P266
Address field is added.
･
Repeat operation until you have added all the receivers you send mail
to.
Next