Docomo FOMA D901i, Manual

Page: 270 / 596

268
Mail
Displaying newly-received i-mode Mail
1
Select “Mail” on the mail/message reception result screen.
2
Select a folder and select a mail.
･
When a melody is attached, it is played automatically. Auto play can be turned off.
☛
P300
･
Displaying received mail
☛
P278
●
When i-mode Mail is received from a party with the incoming mail settings made in the FOMA terminal
phonebook, the settings apply to the operation. Checking with the phonebook is performed as follows.
･
Only when the mail addresses completely match, the name is displayed on the received mail list/view
screen. For a mail address of i-mode terminal, if it is saved without “@docomo.ne.jp” in the phonebook,
the name is not displayed even when the part preceding the symbol @ matches. However, when mail
is received from “mobile phone number@docomo.ne.jp”, the name is displayed as long as the part
preceding the symbol @ matches, even if “@docomo.ne.jp” is omitted in the phonebook entry.
･
When two or more i-mode Mail messages are received at the same time, the mail ring tone, vibrator
and multi-indicator are activated according to the settings made for the party (sender) of the i-mode
Mail received last.
･
When a mail address is saved to the phonebook entry with secret attribute set, the mail ring tone,
vibrator and multi-indicator are activated only when Secret Mode is set.
･
When Privacy Mode is active (“Authorized access” set for Phonebook & Logs), the name of the party
saved is not displayed and the ring tone or vibrator is not activated.
● While receiving Short Message (SMS), i-mode Mail cannot be received. Note that i-mode Mail is not
received automatically even after receiving Short Message (SMS).
●
When i-mode Mail is not automatically received, the mail is stored in the i-mode Center. Up to 3 attempts to
resend the stored mail are made at certain intervals.
● When there is not enough available storage space in Inbox, or the maximum number of received mail is
exceeded, the oldest received mail is overwritten. However, unread mail and protected mail are not
overwritten. Be sure to protect received mail you want to keep.
☛
P287
●
If the mail cannot be overwritten because storage is filled with unread mail and protected mail, reception
of i-mode Mail is stopped.
or is indicated on the screen.
☛
P27
● If i-mode Mail has not been received and is stored in the i-mode Center, or is indicated (
☛
P26).
However, the icon may not be displayed even when i-mode Mail remains in the i-mode Center. When the
maximum number of mail that can be stored in the i-mode Center (
☛
P245) is reached, the icon changes
to or .
● To receive i-mode Mail that you have failed to retrieve, perform Check i-mode Message (
☛
P270) or
Receive Option (
☛
P269). When the maximum number of received mail is reached, display unread mail
(
☛
P278), delete unnecessary mail (
☛
P288) or cancel mail protection (
☛
P287) before receiving new
mail.
● When Privacy Mode is active (“Hide secret fldrs” set for Mail), if automatically received mail is saved in
the folder with Privacy set to “ON” in Folder settings, the reception result screen is not displayed and the
ring tone or multi-indicator is not activated.
● When you send i-mode Mail to your own mail address, the mail may not be received automatically soon
after sending. Perform Check i-mode Message (
☛
P270).
･
If “Message R” or “Message F” is selected, each message is displayed.
･
The received i-mode Mail is saved in Inbox. Note that, when the
received mail matches the criteria specified in Sort Criteria, it is saved
in the specified folder.