Docomo FOMA D901i, Manual, Page: 134 / 596

132
So
un
ds/Disp
lays/L
igh
ts Setting
s
Keypad Sound
Selecting a sound for pressing a keypad
1
Press
m814
on the stand-by display.
2
Press
1
to
4
.
Charge Alert
Setting the sound for charging
Ring alert is set for the start and end of charging.
1
Press
m819
on the stand-by display.
2
Press
1
or
2
.
Default Keypad sound1
INFORMATION
● Also the following sounds are not heard when this function is “OFF”.
･
Confirmation Sounds when the battery level is indicated
･
End alert for infrared communication and data transfer
● Keypad sound volumes interface with the volume of the caller’s voice setting.
☛
P67
● The keypad sound does not sound even if this function is set to other than “OFF”.
･
When Silent Mode is set to ON (except for when Keypad Sound of Customize Silent Mode is set to
other than “OFF” in Customize Silent Mode).
･
When an i-
α
ppli is running (Press
b
to hear the keypad sound.)
･
When the keylock switch is slided
･
When
C
is pressed to display Answer Machine/Voice Memo menu, record quick messages or
activate the camera and shoot images (other than when this function is operated in the same way as
when pressing
c
).
● The keypad sound is not emitted in the following cases if this function is set to “OFF”.
･
When pressed the dial keys while on the call (You will hear the touch-tone (DTMF) from the earpiece.)
Default ON
INFORMATION
● During Silent Mode or Driving Mode, the battery charged sound does not sound even if you have set this
function to “ON”.
･
Press
%
to sound the keypad sound of the cursor position. Note that
the keypad sound does not sound when “OFF” is selected.