Docomo FOMA D901i, Manual, Page: 516 / 596

514
Ch
aracter En
try
2 Enter “ すずき ”.
･
Press
c
or
C
to delete the entry when
you have pressed a wrong key.
･
Enter the character and press
(
to enter
“ ゛ ” and “ ゜ ”.
For example, after entering “ ほ ”, each
pressing of
(
changes the character as
follows: “ ぼ ” “ ぽ ” “ ほ ”.
For characters that do not accept “ ゛ ” or “ ゜ ”,
they are entered as two-byte characters.
･
Pressing
m
changes characters to two-byte
katakana characters.
■
Setting hiragana without conversion
Press
o
after entering the hiragana.
3 Press
p
.
･
When the desired character is not displayed,
press
%
or
p
. A list of conversion options
is displayed. Select the desired character.
･
Press
d
to convert text to kana/kanji when a
predict conversion option is not displayed.
Predict conversion
☛
P516
･
Press
c
or
C
to restore the entry
before conversion.
■
Displaying the list of conversion options
When one pressing of
p
fails to display
the desired character, a list of conversion
options is displayed by pressing
%
or
p
.
If the list of conversion options has some
pages, you can switch to the next page and
the previous page by pressing
a
and
t
,
respectively. Press
%
, select conversion
options or press the key for the number of
each option.
4
Press
o
.
The character is set.
･
When Input prediction of Input Method
Setting is “ON”, select “Close”.
■
Inserting characters
Press
O
to move the cursor to the insertion
point and enter the character. The entered
character is inserted at the cursor position.
■
Deleting characters
･
When the cursor is inside an entered
character string
(Example:
鈴木 郎
)
･
Press
c
or
C
to delete the
character at cursor position.
･
Hold down
c
or
C
(half press) for
over a second to delete the character at
the cursor position and all following
characters.
･
When the cursor is at the end of an
entered character string (Example: 鈴
木一郎 )
･
Press
c
or
C
to delete the
character at the left of cursor position.
･
Hold down
c
or
C
(half press) for
over a second to delete all entered
characters.
■
Entering line feed
Move the cursor to the location to enter a
line feed and press
#
.
･
Some entry fields may not permit a line
feed.
5 Press
o
.
Character entry is exited.
･
Delete all characters and press
o
or
c
or
C
to discard entered characters and exit
character entry.
“
す
”
→
Press
3
three times.
Press
r
to move the cursor one
position to the right.
“ ず ” → Press
3
three times and press
(
.
“
き
”
→
Press
2
twice.
p
p
/
d
一