Docomo FOMA D901i, Manual

Page: 489 / 596

487
Data Co
mm
unic
a
tio
n
9 Click “OK”.
The PC must be restarted for the changes to
take effect. Click “ はい ” when a window prompts
you to restart the PC.
･
If optimization of W-TCP Setting has already
been performed, the PC must not be restarted.
･
Performing communication
☛
P488
Setting 64K data communication by easy
setup
Setting under Windows XP
･
The screen display differs under OS other
than Windows XP.
This method allows you to set 64K data
communication.
DoCoMo’s mopera is selected as a provider.
･
Using providers other than mopera
☛
P487
1 Perform Steps 1 to 3 of “Setting packet
communication using mopera”.
☛
P484
Select “64K
データ通信
(64K data communication)”
in Step 2 for the communication procedure.
2 Enter the connection name and select
the modem and click “
次へ ”.
Enter a connection name in “ 接続名 ”.
･
The following characters (one-byte) cannot
be entered:
￥ / : ＊ ? ! <> ｜
･
Check that “FOMA D901i” is set for “ モデムの
選択 (Modem selection)”.
3 Click “ 次へ ”.
･
The entry of a “ ユーザー名 ” or “ パスワード ” is
not required.
･
When the OS is Windows XP or 2000, select
the users that are allowed to access the
connection. For Windows Me or 98, selection
of the users that are allowed to access the
connection is not displayed.
4 Check the settings and click “ 完了 ”.
5 Click “OK”.
･
Performing communication
☛
P488
This method allows you to set 64K data communication.
･
Using mopera
☛
P487
1
Perform Steps 1 to 3 of “Setting packet
communication using mopera”.
☛
P484
Select “64K データ通信 ” in Step 2 for the
communication procedure, and “
その他
” in Step
3 for the dialup connection.
Setting 64K data communication using mopera
Example
Setting 64K data communication using other
providers
Next