Docomo FOMA D901i, Manual, Page: 488 / 596

486
Data Co
mm
unic
a
tio
n
3 Set dialup connection (APN)
APN “mopera.ne.jp” is registered in number
(cid1*) by default to connect to mopera.
a
Click “ 追加 (Add)”.
“ 接続先 (APN) の追加 (Add dialup
connection(APN))” screen is displayed.
b Enter a dialup connection name (APN),
which supports the FOMA packet
communication of your provider, in
the “
接続先
(APN) (Dialup connection
(APN))” and click “OK”.
The display returns to “ 接続先 (APN) 設定 ”
screen.
･
Only one-byte alphanumeric characters,
hyphens ( - ) and periods ( . ) can be
entered in the “
接続先
(APN)”.
* 1 to 10 can be registered as cid.
4 Click “OK”.
The display returns to the screen in Step 2. “ 接続先
(APN)” set in Step 3 is displayed in “ 接続先 (APN)
の選択 (Select dialup connection (APN))”.
5 Check the connection name in “ 接続先
(APN) の選択 ” and click “ 次へ ”.
6 Enter “ ユーザー名 ” and “ パスワード ”
and click “ 次へ ”.
Enter the “ ユーザー名 ” and “ パスワード ” given
by the provider correctly. Make sure such as the
case of each character.
･
When the OS is Windows XP or 2000, select
the users that are allowed to access the
connection. For Windows Me or 98, selection
of the users that are allowed to access the
connection is not displayed.
7
Check that “ 最適化を行う ” is selected
and click “ 次へ ”.
This optimizes the W-TCP setup required for
packet communication.
･
This screen is not displayed if optimization
has already been performed.
8
Check the settings and click “ 完了 ”.
▼