Docomo FOMA D901i, Manual

Page: 176 / 596

174
Ca
m
e
ra
Before using the camera
Still images and videos can be shot with your FOMA terminal camera.
･
Shot still images, recorded videos/sounds can be displayed and played on FOMA terminal and can
also be sent via i-mode Mail or data transfer to the devices such as other FOMA terminals, other
company’s mobile phones or PCs.
･
Shot still images, recorded videos/sounds can be set for the stand-by display, incoming call screen or
ring alert.
･ Still images and videos can be shot laying frames over or applying effects such as monotone and
sepia. In addition, adding frames, pasting text and stamps and applying various effects are possible
for still images after shooting.
･
Shot still images, recorded videos/sounds can be saved on the miniSD memory card.
･ The miniSD memory card is not included in the bundle. If you have no miniSD memory card, you can
purchase it at electric appliance stores.
☛
P387
Using the camera
･
Note that though the camera is manufactured using extremely accurate technology, some pixels and
lines may always be displayed to be lighter or darker than you expect. Please also note that noise
such as dots and lines may increase especially when you shoot in a place with very low light intensity.
･
When the lens is exposed to direct sunlight for a long period of time, the inside color filter will become
discolored and images may be correspondingly discolored as well.
･
When you attempt to shoot a strong light source such as the sun or a lamp or when the battery level is
low, the image may become dark or degraded.
･
Depending on the characteristics of the lens, images may be displayed to be distorted.
･
Capturing under illumination flickering at high frequencies such as fluorescent lights, mercury vapor
lights, or sodium lights may cause stripes to appear on the screen, but this is not a malfunction. Strips
may be reduced by changing the distance or the angle of shooting the object or by moving to another
position.
･
Images taken with the camera may differ from the actual subjects in color and brightness, depending
on conditions.
･
There is a small time lag between taking a picture and pressing
o
or
C
. If you shoot a fast
moving subject, the shot image might slightly differ from the subject displayed on the screen when
you press
o
or
C
.
･
When you activate Camera or Auto Focus or switch the in-/out-camara, a motor sound may be heard,
but this is not a malfunction of FOMA terminal.
･
The in-camera in FOMA terminal uses CMOS technology. Note that in darker places, a CMOS
camera may take a slightly grainier picture compared to one taken by an out-camera (regular CCD
camera) and this graininess is not an error.
･
If the lens is contaminated with fingerprints or skin oil, you cannot shoot clean images. Use a soft
cloth to remove any such contaminants before shooting.
･
Set brightness depending on the situation of the shooting.
☛
P190
The Compact light can be used for shooting in a dark place.
☛
P179, P184
･
There is a small time lag between taking a picture and pressing
o
or
C
. Do not move FOMA
terminal for period after pressing
o
or
C
.
About the camera
Points of concern when shooting images
Note: The miniSD memory card is not included in the bundle and needs to be purchased.
☛
P387