Docomo FOMA D901i, Manual

Page: 521 / 596

519
Ch
aracter En
try
Copy Character
Copying/cutting and pasting
characters
Characters copied or cut from a character entry
screen are pasted elsewhere. They can also be
pasted into another character entry screen.
･
Copied and cut characters are retained until
FOMA terminal is turned OFF and you can paste
them in other locations any number of times.
･
Only one item can be stored. When you cut or
copy a new item, it overwrites the previously
saved item.
Copying/cutting characters
Copying characters
1
Press
m1
on the character entry
screen.
･
Press
m2
to cut the characters.
2 Place the cursor at the start point and press
o
.
･
To select the whole sentence, press
m
and
o
.
3 Place the cursor at the end point and press
o
.
The characters in the selected range is copied.
･
To select the part of the sentence from the start
point to the beginning, press
m
and
o
.
･
To select the part of the sentence from the
start point to the end, press
p
and
o
.
Pasting characters
･
When the pasted phrase exceeds the number of
characters permitted in the edited sentence,
excessive characters are ignored.
1 Place the cursor at the place to paste
and press
m3
on the character
entry screen.
The characters are inserted at the cursor position.
KUTEN Code Input
Entering characters using codes
Characters, numbers and symbols on the code
list are entered using 4-digit code.
Entering “
携
” (code number 2340)
1 Press
p8
on the character entry
screen.
INFORMATION
●
A character string selected above that contains
blank spaces is processed as follows (When
operating from the character entry screen for
message text, the blank spaces are valid):
● When operating from the entry screen for
message, you can also register by pressing
m62
.
● When there is no character entered, press
m6
to display the fixed phrase edit screen.
● When 50 fixed phrases have already been
registered, the list of fixed phrase registration
screen is displayed. To register a new phrase,
you must either delete the data from a list or
edit a registered phrase.
･
Blank spaces only
: Cannot be registered as a fixed phrase
･
Blank spaces before and after a character string
: Only character string is valid
･
Blank spaces between characters
：
Blank spaces are also valid
Example
INFORMATION
●
When operating from the entry screen for
message, you can also operate by pressing
m
and selecting “Copy”/“Cut”.
INFORMATION
● When operating from the entry screen for
message, press
m
and select “Paste”.
● When the type of the copied/cut characters does
not match with the character type used of the
paste destination field, pasting is disabled. For
example, hiragana or kanji cannot be pasted into
the mail address field (one-byte alphanumeric).
● When a character string containing a line feed is
pasted into an entry screen that cannot contain
any line feeds, the line feed is replaced by a blank.
Example
Next